Dockem VentPro Magno Mount 3.0 Series; Magnetic Car Mount for Vents with Custom Metal Plates, Magnet Head, and Swivel Ball Socket
- SIMPLE AND POWERFUL: Easy to use vent clamps make setup and removal a breeze while providing a strong grip. Not meant for use on vertical or highly curved vent slats. Unique, custom grip tape security stickers included for added clamping power.
- UNIQUE DESIGN: Our custom mounting head provides maximum hold and allows for use with our unique smaller metal plates, which are designed to be used on the outside of your phone or case and will fit most phones without interfering with the camera, buttons, or Qi charging
- 2 INCLUDED MOUNTING PLATE OPTIONS: Our unique micro metal plates have a much smaller footprint than other plates on the market, allowing placement on phones where it won't interfere with wireless charging. Alternatively, our larger plate can be used between the case and phone for those with thin cases, but may interfere with wireless charging depending on placement.
- NOTE: The included plates are unique and allow for a stronger hold than plates that come with most other magnetic mounts, so we cannot guarantee compatibility with 3rd party metal plates (although you may find they work OK). Adhesive on Micro Plates may not stick properly to rubber or TPU cases, or rubberized finishes.
- IDEAL WITH OUR M-SERIES CASES: For maximum performance use with our M-Series phone cases (sold separately) which have the metal plate built-in and are designed specifically for compatibility with the Magno 3.0 series mounts.
Magno Mount 3.0 Series: VentPro Magnetic Car Mount for Vents The Magno Mount 3.0 Series VentPro Mount is a unique smartphone vent mounting solution that provides best-in-class holding power for complete stability in all road conditions. The magnetic head utilizes extra-strength magnets to ensure a secure grip with our included metal plates while the clamps hold strongly to your vent slats. Its magnetic head installs on a ball- joint swivel so you can adjust your viewing angle to your comfort zone. Designed for the metal plates to be at the top of the phone to minimize the blocking of the vent. The Qi Advantage: Most magnet mounts require your metal plate to be in the middle of your phone which interferes with Qi Wireless Charging. Not the Magno Mount 3.0. The magnetic head is specifically designed to provide extra magnetic hold and grip so you can position the plates at the top of your phone, free and clear of the wireless charging hardware in your phone. So you can use your phone with any wireless charger. Read more VentPro Features & Compatibility Vent-Clamps & Compatibility Our vent-clamp design unites power and simplicity for an easy-to-use mounting setup. When the switch is flipped up, the clamps are open and ready to slide onto your vent slat. Simply press the switch down to close the clamps and voila, you've mounted your VentPro. The VentPro is not meant for use on vertical or highly curved vent slats. In case you experience slippage with the vent-clamp, we include unique and custom grip tape stickers for added grip on your vents. Magnetic Swivel Head & Support Feet The extra-strength magnetic head is installed on a ball-joint swivel, meaning you can direct your phone towards you for a more comfortable sight line. We made the ball-joint larger than our previous versions and included silicone where the ball-joint meets the head. This increases friction and provides more stability to the magnetic head, allowing it to stay at the angle you choose. The support feet have silicone bumpers on both feet to comfortably rest against the vent slats (or below, depending on your vent and where you mount it). They provide more support and stability to the mount and your phone so it won't wobble as you drive. Won't Interfere with Qi Wireless Charging In most scenarios, magnetic plates placed at the middle of a device provide the most stable hold. What many people don’t realize, however, is that placing the plate in the middle of a device also blocks wireless charging. Our solution to this problem was to make the Magno Mount 3.0 extra strong, so that the location of the plate on the device no longer matters. This allows the plate to be placed at the top of your phone and still provide a secure hold without interfering with wireless charging. Read more 3 Unique Mounting Options & Package Contents Micro Metal Plates Small and sleek, they attach to the outside of your phone or case with a very strong 3M adhesive. They are meant to be left exposed, so we included 1 in a sleek black finish and 1 in an elegant brushed nickel finish (peel off the blue film). With our custom magnetic mounting head, these plates keep your device from twisting while providing strong magnetic adhesion. With the smaller footprint, these can be placed toward the top of most phones so that they don't interfere with wireless charging, and/or placed above the camera module. Dimensions: 12 x 40 mm Mid-Size Metal Plate Each mount also comes with 1 mid-size metal plate for placement between the phone and case. It is slightly thicker than most plates, providing a stronger hold. A smaller footprint allows placement towards the top of the phone on some models without interfering with Qi charging (i.e. to the right of the camera on iPhone XS, iPhone XS Max, iPhone XR). Note that magnetic strength will be highly dependent on your case thickness. Dimensions: 35 x 45 mm Dockem M-Series Cases (Sold Separately) Our Dockem M-Series cases (sold separately) have an integrated metal plate designed specifically to be compatible with the Magno Mount 3.0 series. They provide the best overall solution with a super strong hold, invisible integration, and no interference with wireless charging. Available for most new iPhones; iPhone XS/X, iPhone XR, and iPhone XS Max. The M-Series cases come in a variety of styles and colors (any of our cases with M1, M2, or M2T in the name). Package Contents A.) Mid-Size Metal PlateB.) 2 Micro PlatesC.) Ball Joint WasherD.) Magno Mount 3.0 Magnetic HeadE.) Alcohol Prep PadsF.) VentPro Mount Read more Easy Removal Tip The extra-strength magnets are used to keep your phone securely on the mount. This can make it difficult to pull the phone directly away from the mount. Always twist the bottom up first, then pull the phone away from the mount. Pulling the phone away directly will put stress on the mount and can damage it. Removal is quick and easy when done this way and will keep your mount safe. Read more VentPro Magno Mount 3.0 Series DashPro Magno Mount 3.0 Series DashMini Magno Mount 3.0 Series Minikin Magno Mount 3.0 Series Mount Base Type Vent-Clamp Gel Suction Cup 3M VHB Tape Adhesive 3M VHB Tape Adhesive Adjustable? Yes, ball joint swivel and can be moved easily on vents Yes, adjustable arm extends out or adjusts up/down Yes, ball joint swivel No, it's the Magno Mount 3.0 magnetic head with adhesive on the back Type of Mount Car Vents (not vertical vents or curved vents) Car (generally flat dashboards) Car, Wall, Any Flat Smooth Surface Car, Wall, Any Flat Smooth Surface
- Package Dimensions: 3.3 x 3.2 x 2.7 inches
- Item Weight: 3.2 ounces
- Shipping Weight: 3.2 ounces
- Item model number: MGN MNT v03 VNT